Here’s how to upgrade your Alienware 17’s RAM: 1, Shut down and close your Alienware 17. 2. Flip it over and loosen the two screws on the center plate. These don’t come out. 3. Pry off the cover. You shouldn’t need anything other than your fingers, as it pops right out. 4. Locate the RAM. The two modules are stacked one on top of the other. Depending on your configuration, it’s possible there may only be one module of RAM in your laptop. 5. Press down on the clips on the top set of SODIMMs. The RAM will pop out at an angle. 6. Gently pull the RAM from the slot. Be sure not to touch the contacts and to place the unused RAM in an anti-static bag. 7. Repeat the steps with the lower SODIMM. 8. Place the new RAM in at an angle, then press it flat beneath the clips. Repeat for the top SODIMM. 9. Place the cover back on the bottom and tighten the screws. 10. Verify your RAM is recognized by going to Settings > System > About or by visiting the Device Manager.
Laptop Guide
Previous TipNext Tip
